Orca DTF 24" X 328' Double Matte Hot Peel Film (2-Rolls/Pack)
- Buy 2 for $273.60 each and save 5%
- Buy 4 for $244.80 each and save 15%
- Buy 10 for $230.40 each and save 20%
- Buy 20 for $201.60 each and save 30%
- Buy 40 for $187.20 each and save 35%
Print. Peel. Press. — Flawless transfers in seconds.
Unlock production‑speed direct‑to‑film printing with Orca DTF double‑matte film. A proprietary five‑layer ink‑receptive coating on the printable face delivers razor‑sharp detail and rich, uniform white lay‑down, while the matte backing adds feed‑path grip that virtually eliminates roll slippage in Epson i3200‑based and similar printers. Hot‑peel chemistry lets you remove the carrier a mere five seconds after pressing, leaving a soft, matte hand that blends seamlessly into cotton, polyester, nylon, denim, leather and hard‑surface blanks.
Why Shops Choose Orca
True Hot-Peel - peel 5 seconds after transfer for faster finishing and higher throughput
Eco-Compliant - OEKO‑TEX ECO‑PASSPORT & CPSIA‑lead‑free formulation for kidswear safety
Double-Sided Matte Base - extra friction for perfect media tracking; no head strikes on long runs
One‑Film‑Fits‑All Fabrics - cotton, poly, blends, nylon, denim, leather & hard goods
Five-Layer Matte Coating - holds more ink without bleeding and prevents orange‑peel texture
75 µm / 75 gsm PET - optimal stiffness for powder application yet flexible on curved items
Frequently Asked Questions
Is Orca film compatible with powderless (DTF+) systems?
Yes. Because the base PET is 75 µm rather than 100 µm, it feeds smoothly in powderless “film‑only” printers while still accepting traditional adhesive‑powder workflows.
Can I cold‑peel if I prefer?
You can; however, waiting for a cold peel adds time and does not improve wash fastness. Hot peel in 5–10 sec is recommended.
What RIP settings work best?
Start with 8‑pass, 720 × 1200 dpi, 100% white under‑base, 120% CMYK. Adjust ink limits so the white layer is matte‑dry before the CMYK overprint.
| Maximum Print Width | 24" (610mm) |
|---|---|
| Manufacturer | Orca |
| Compatible Fabric Color | White/Light Colors, Dark/Colors |
| Compatible Fabric | Cotton, Polyester, Nylon, Leather, None/Hard-Surfaces |
| Quantity per Pack | Case (2/CS) |
| Printer Type | Direct-to-Film (DTF) |
| Base Film | PET (polyethylene-terephthalate) carrier |
| Ink-receptive coating | Five-layer matte coating on the printable side; back side also matte-textured for extra grip through the printer |
| Media Thickness Range | 75 µm (75 gsm) |
| Printable Side | Only one side is ink-receptive (look for the slightly rougher matte face); opposite side is a non-printable matte that simply adds friction in the feed path |
| Peel Type | Hot Peel |
| Recommended Press Sequence | 1. Cure film+powder – 255°F / 125°C, 60 sec (in oven or under press slightly open). 2. Transfer press – 335°F / 168°C, 15 sec, medium pressure; wait 5 sec and peel hot. 3. Post-press – 335°F / 168°C, 15 sec with Teflon or silicone sheet |
| Wash Fastness | 40–60 + domestic wash cycles when pressed |
| Shelf-Life & Handling | Unopened: 12 months at 50–86 °F / 10–30 °C, 45–60 % RH, out of direct sunlight. Open rolls: use within 1 month & keep in resealable bag or carton |
| Certifications | Film formulation meets OEKO-TEX ECO-PASSPORT & CPSIA (lead-free, phthalate-free) |
Login and Registration Form